Included in Reason 11 Reason 11 Suite. Getting a vocal performance right means so much more than hitting the right notes at the right time. Sometimes you get that almost perfect performance with perfect feel and presence, but the singer might have missed a. Auto-Tune 7 TDM/RTAS is only compatible with Pro Tools 10 or earlier. If you’re not using Pro Tools please check out Auto-Tune Pro. If you’re using Pro Tools 10.3.8 or later, please check out Auto-Tune. X42 Auto-Tune X42 Auto-Tune is a simple autotuner based on the zita-at1 by Fons Adriaensen. It’s much better if you use it as a light tonal fixer over a full-on robotic autotuner. It works by resampling the material fed into it and then looping the signal. It does not have any formant correction capabilities.
Reason is now able not only to tempo slice audio parts that you record or import, as it has been able to do for a couple of years, but also analyse monophonic vocal audio parts and make them editable in a similar way to something like Melodyne. At present, it’s restricted to working best with monophonic vocal parts and not polyphonic audio (although this may change), but it’s still a massive bonus to be able to alter the pitch and timing of vocals in a completely elastic way! Load up or identify a monophonic vocal clip in your project and then double-click it and you will see it opens in the pitch edit view. Zoom in a little so you can see all the slices.
You will see that Reason has identified the different pitches in this sung audio passage, and also the lengths of those notes, which are shown as differently sized blue rectangles. You can click on any note to hear it played as a tone, or hold the Command (Mac) or ALT (PC) key while clicking to audition the actual slice sound itself. These slices obey your sequencer’s snap settings and much of the time it can be a good idea to leave snapping switched on to a setting like 1/16 so you don’t accidentally detune a note or mess up its timing. Of course you can turn snapping off if you do need to make very small changes to pitch or timing.
With snapping switched on, you will find that you can drag any slice up or down to transpose it by a semitone per step. Drag two steps to transpose by a whole tone, and so on. You can move pitches quite far up or down before they start to sound odd, so changing a vocal part from major to minor or vice versa for example is easy: just change the minor notes to major ones, or major to minor. You can also hold the Shift key while selecting multiple, noncontinuous notes and then drag them all up or down by the same amount at the same time.
The same technique applies to altering timing, and the snap settings also apply. Free saxophone vst plugin. The difference here is that you can pick up either end of a blue slice and then drag left or right to alter the length of that sound, syllable or word. When you do this, the overall length of the clip will not be changed but the previous or following note (depending on which end you are dragging) will be lengthened or shortened (depending on which direction you drag) so that the gap is filled, and there is no silence created. This can be one instance in which you might want to turn snapping off or use a very fine snap value so that you can precisely control the points at which words or sounds occur.
By picking up and dragging the blue “stick” between and below each slice, you can alter the transition between two slices. What this does in practice is change the time one note takes to overlap with another. A very short overlap and the jump between notes is very quick and robotic. A longer overlap means a smoother transition, and you can be flexible with how you set this. It’s particularly useful when editing the lengths of slices to ensure they don’t end up sounding artificial.
The white stick above a slice is used to control vibrato. The wavy lines you see in black behind a slice represent the vibrato of that note—vibrato being an important component of sung notes. An intense wave in the line means lots of vibrato and less waving or indeed a flat line means little or no vibrato. By dragging the white stick you can alter the vibrato, but bear in mind that you can’t add more than was originally present in the recording: you can only have 0–100% of the original vibrato. Still, this is handy for smoothing out vibrato when there’s too much in the original notes.
In the column on the left of this editor view, you can see several options. If you select one or more notes and click the Correct button, Reason will snap the pitch and timing of the selected slices to the nearest grid positions, effectively quantizing both pitch and time, based on the sequencer’s snap settings. The Reset button can be used to undo this and return both to their original state. The Transpose modes are Snap and Jump, which either snap to the snap setting or jump a whole note, and Fine, which gives you very precise control to move the pitch or position of a note using the mouse.
The Quick processing and loading will save your time and force you to work with no irritation brought by long processing and loading. Waves bundle vst crack.
The toolbar at the top of the pitch editor section allows you to make manual settings for any slices and in some cases, for groups of slices. These are mostly the same controls you can access by selecting slices with the mouse but here they allow you to be more precise by entering exact values, for example fine tuning one or more slices by exactly 25 cents. One interesting feature that may not be immediately obvious is the Level control at the far right, which lets you manually make any slices selected louder or quieter without affecting other slices or the level of the track in the mixer. This is incredibly useful for when an individual sound or word inside a vocal part is too loud or quiet, and saves you having to export the clip to a wave editor to make the correction. Simply change slice level directly in the pitch editor!
AutoTune analyzes sampled sounds in frequency space to allow you to tune all of your sounds to the same frequency! Just simply enter the note you want to use as the base for all of your sounds, such as C3, and then simply drag your samples onto the application, and voila! Let AutoTune do the rest! AutoTune can also be used to convert directories, instead of individual files, by simply dragging the directory onto the app.
Now, AutoTune is VERY computationally intensive, so it can take it a while for the analysis to take place, be patient! AutoTune is also pretty memory intensive, using around 6 to 8 megs of RAM for the average file, so the more memory you have, the faster it will run. AutoTune now supports mono and stereo WAV files, 8/16/24/32 bit formats (both MS and IEEE), and can also normalize and DC correct samples!
AutoTune is a product developed by Analogx Sayit. This site is not directly affiliated with Analogx Sayit. All trademarks, registered trademarks, product names and company names or logos mentioned herein are the property of their respective owners.
All informations about programs or games on this website have been found in open sources on the Internet. All programs and games not hosted on our site. When visitor click 'Download now' button files will downloading directly from official sources(owners sites). QP Download is strongly against the piracy, we do not support any manifestation of piracy. If you think that app/game you own the copyrights is listed on our website and you want to remove it, please contact us. We are DMCA-compliant and gladly to work with you. Please find the DMCA / Removal Request below.
Please include the following information in your claim request:
You may send an email to support [at] qpdownload.com for all DMCA / Removal Requests.
You can find a lot of useful information about the different software on our QP Download Blog page.
How do I uninstall AutoTune in Windows Vista / Windows 7 / Windows 8?
How do I uninstall AutoTune in Windows XP?
How do I uninstall AutoTune in Windows 95, 98, Me, NT, 2000?
Nothing! Download AutoTune from official sites for free using QPDownload.com. Additional information about license you can found on owners sites.
It's easy! Just click the free AutoTune download button at the top left of the page. Clicking this link will start the installer to download AutoTune free for Windows.
Yes! The free AutoTune download for PC works on most current Windows operating systems.